General-tools-and-instruments MMD4E Manuel d'utilisateur télécharger pdf (Page 4)

- Measuring Test Pins: Stainless steel, replaceable

- Protective Cover

- Material measured: Wood/timber and building material ie; brick, concrete, drywall, plaster, etc.

- Audible Sound: Selectable 8 different tones

- Hold Switch to freeze/hold the LCD reading

- Large LCD Display

Measuring pins (replaceable)

- Measuring Range: 5% - 50% (wood);

1.5% - 33% (other building materials)

(selectable)

- Operating Voltage: “9V” battery (included)

- Operating Current: <15mA

- Low Battery indication: 7.0V DC (approx.)

- Auto Power off: 3 minutes

- Resolution: 0.1%

- Accuracy: (3%+3 digits)

- Hold Switch: Freeze/hold the reading

- Audible Sound: 8 different tones/level

(selectable ON/OFF sound)

Audible sound

1. Lower level: Slow beeps

2. Medium level: Medium beeps

3. Higher level: Rapid beeps

OPERATING INSTRUCTIONS

Replace with a “9V” alkaline type battery when low battery warning “ ” is seen on the LCD.

Remove the battery cover and install a fresh battery.

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

General-tools-and-instruments MMD4E Manuel d'utilisateur Page 4