General-tools-and-instruments DAF2005MDL Manuel d'utilisateur télécharger pdf (Page 13)

3)Power on the meter by pressing the " Power Button "

( 3-2, Fig. 1 ).

4)For the Type K Probe, press the " Function Button "

( 3-6, Fig. 1 ) to let the bottom right LCD show the

" K type " indicator

For the Type J Probe, press the " Function Button "

( 3-6, Fig. 1 ) to let the bottom right LCD show the

" J type " indicator

4-4 Data Hold

During the measurement, press the " Hold Button " ( 3-3,

Fig. 1 ) once will hold the measured value & the LCD will

display a " HOLD " symbol.

* Press the " Hold Button " once again will release the data

hold function.

4-5 Data Record ( Max., Min. reading )

* The data record function records the maximum and

minimum readings. Press the " REC Button " ( 3-4, Fig.

1 ) once to start the Data Record function and there

will be a " REC. " symbol on the display.

* With the " REC. " symbol on the display :

a)Press the " REC Button " ( 3-4, Fig. 1 ) once, the "

REC. MAX. " symbol along with the maximum value

will appear on the display.

If intend to delete the maximum value, just press

the " Hold Button " ( 3-3, Fig. 1 ) once, then the

display will show the " REC. " symbol only & execute

the memory function continuously.

1 2 ... 8 9 10 11 12 13 14 15 16 17 18 ... 26 27

Pas de commentaire

General-tools-and-instruments DAF2005MDL Manuel d'utilisateur Page 13