General-tools-and-instruments BF10 Manuel d'utilisateur télécharger pdf (Page 7)

OPERATING INSTRUCTIONS

Before plugging the BF10 transmitter into either kind of

branch circuit receptacle (GFCI or non-GFCI), unplug all

appliances and equipment connected to that circuit. If you're

not sure whether an appliance or a piece of equipment is

side of caution. Then plug in the transmitter.

To check a 110V GFCI or non-GFCI outlet for wiring faults,

slide the function switch on the transmitter (Fig. 1, Callout A)

to the right (the Socket Test position).

• If the outlet has no wiring faults, the two green LEDs in

the top row of socket test indicator lights will illuminate

(turn on) and a continuous tone will be heard.

• If the outlet has an open circuit or is not powered, no LEDs

will illuminate and no tone will be heard (because the

transmitter will remain unpowered).

• If the outlet has any of four common wiring faults (missing

earth (ground), missing neutral, live and earth reversed, and

live and neutral reversed), a unique pattern of one or more

green LEDs, or green and red LEDs, particular to that fault

will be displayed and a pulsed tone will be heard. Labels

to the right of the LEDs indicate which fault has been

detected.

BF10-Manual_FINAL4-082012_awb 8/20/12 10:31 AM Page 7

1 2 3 4 5 6 7 8 9 10 11 12

Pas de commentaire

General-tools-and-instruments BF10 Manuel d'utilisateur Page 7